Blink light(s)

Blink light(s)

In order to allocate a specific fixture in your installation, we have a ''Blink'' mode in our helioCONNECT interface. The Blink function is specifically useful in facilities with high amount of fixtures. With this feature you have the possibility to see if your unit is still ''awake'', connected, and where it is located. 
When pressing the button, the fixture will light up at it's full potential for a split second.

The video below explains how to perform a ''Blink'' of your fixture.

NOTE: Make sure when selecting the Blink feature, you're avoiding looking directly at the LED Plate. 





    • Related Articles

    • Identify and name light(s) in a multi-unit system

      In large growing facilities you might find some difficulties to identify a specific fixture. To simplify this, we have an option to blink your lights individually or together. By "blinking" the fixture will light up all the spectrums to full ...
    • Setup/activate my light(s) WIFI-function

      Presteps First make sure that your light can support the WIFI upgrade. To do this look at the first 6 serial numbers on your light. If the light has a serial number starting with 002.005, then the light will support the WIFI upgrade. If the light has ...
    • Setup light(s) directly to your laptop

      If you cant reach your lights, and/or you suspect there may be issues with your router, there are alternative ways reaching your light(s). Also, this is a good walk-through if you want to check if a connection issue is in your lights or in your ...
    • Light recipes

      To have the recipes downloaded to your computer you press right-click on each file below and choose "save as" and download your desired light recipe(s): G plate - vegetation promotion  C plate - vegetation promotion C plate - flowering promotion ...
    • Where do I find Heliospectras software ("helioCONNECT") for controlling my light(s)?

      Here you'll find the helioCONNECT software for your Windows or Mac OS computer to ensure a connection to your fixtures.  For instructions regarding the connectivity through the software, please refer to "Connect to your light(s)" . This article ...