Import light recipe into your fixture

Import light recipe into your fixture

Start by downloading the light recipe-file you are looking for, from our Downloads page (link). Then please follow these instructions:

1. Connect to your light as you want to upload the light recipe, and navigate to the "Operation" tab. 
2. Click on "Choose file" to choose the light recipe file. 
3. Click "Import". Now the light recipe file is uploaded into your light. 
4. Finally, if you also like to start the schedule directly, click "Start schedule"



§






    • Related Articles

    • Light recipes

      To have the recipes downloaded to your computer you press right-click on each file below and choose "save as" and download your desired light recipe(s): G plate - vegetation promotion  C plate - vegetation promotion C plate - flowering promotion ...
    • Blink light(s)

      In order to allocate a specific fixture in your installation, we have a ''Blink'' mode in our helioCONNECT interface. The Blink function is specifically useful in facilities with high amount of fixtures. With this feature you have the possibility to ...
    • How to perform a fixture reboot

      If your light(s) don't respond to the updates it may be due to the "safe mode" setting. In this case, the fixture(s) requires a reboot. To perform a reboot, please follow these steps: Open System Assistant. In the top menu, go to "System," then ...
    • I can't find my fixture(s) with helioCONNECT

      This may be caused by the following:  Multiple network connection If your computer is connected to several networks simultaneously, this may cause the issue. A common situation is that you are connected to 1 WIFI and 1 ethernet network. Please ...
    • Manually set up a schedule for your fixture(s)

      Configuring a Schedule. The Heliospectra fixtures can execute and repeat up to 150 light events per day. A light event is a setting change of one or more of the light channels in the fixture. For example, a schedule could comprise the following light ...