Set only spectrum in your schedule (suitable when you lights are controlled external timer).

Set only spectrum in your schedule (suitable when you lights are controlled external timer).



When your light(s) are controlled by external timers, you might want to only set the light quality/spectrum in your lights, and not the light(s) internal timer/schedule. Please follow the procedure written further down or in the video above to do so.
  1. Open helioCONNECT.
  2. Highlight the light(s) you want to setup and click "launch".
  3. Now your light(s) Web User Interface, will open in your internet browser.
  4. Go to the tab "Operation".
  5. Scroll down until you see the paragraph "SCHEDULE".
  6. Here type in 0 (zero) in all fields regards to time. 
  7. Then type in what level of light intensity you wish on each channel.
  8. Click "Add".
  9. Click the green btutton "Start schedule".
  10. Now, your light(s) will drive all time on the desired light intensity of each channel. To turn it/them on/off, you use your own external timer connected to your electrical power grid system.

(To do a full schedule setup, including your light(s) internal timer, please go to [this page] ). 
    • Related Articles

    • Manually set up a schedule for your fixture(s)

      Configuring a Schedule. The Heliospectra fixtures can execute and repeat up to 150 light events per day. A light event is a setting change of one or more of the light channels in the fixture. For example, a schedule could comprise the following light ...
    • Setup group(s) of lights in network

      When your facility includes a high amount of fixtures, we recommend you to have a (dedicated) network to connect specifically for these units. This network allows you to separate the total amount of units in different group(s). Every group will ...
    • EOS Quick Set Up guide

      Below you will find a digital copy of the Quick Set Up Guide which is provided with each lamp. Revision 3 published 2019-08-28.
    • SIERA Quick Set Up Guide

      Below you will find a digital copy of the Quick Set Up Guide which is provided with each light bar. Version 1.4 published 2021-02-18.
    • ELIXIA and DYNA Quick Set Up guide

      Below you will find a digital copy of the Quick Set Up Guide which is provided with each lamp. Revision 3 published 2019-08-28.