Set your fixtures Date & Time - Manually

Set your fixtures Date & Time - Manually


Setting system time manually

By default, the fixture uses a ''Network Time Protocol'' server for setting the light system time. The system time can also be configured manually if no NTP server is available. If unsure, it is recommended to use the default settings.

To set the light(s) clock/time manually, please follow this procedure:
  1.     In the Web UI, click the ''Configuration tab''.
  2.     In the time field, verify that the "Use NTP" check box is cleared.
  3.     Enter the current time in the format HH:MM:SS in the field next to the "Set Date/Time" button.
  4.     Click "Set Time" to update the system time.

    • Related Articles

    • Changing the time and date of your lights automatically

      Setting System Time By default, the lights are using a Network Time Protocol server to set the light system time.   To have your light(s) set the time automatically by NTP, you are required to have an internet connection to the same network as your ...
    • Manually set up a schedule for your fixture(s)

      Configuring a Schedule. The Heliospectra fixtures can execute and repeat up to 150 light events per day. A light event is a setting change of one or more of the light channels in the fixture. For example, a schedule could comprise the following light ...
    • EOS Quick Set Up guide

      Below you will find a digital copy of the Quick Set Up Guide which is provided with each lamp. Revision 3 published 2019-08-28.
    • SIERA Quick Set Up Guide

      Below you will find a digital copy of the Quick Set Up Guide which is provided with each light bar. Version 1.4 published 2021-02-18.
    • ELIXIA and DYNA Quick Set Up guide

      Below you will find a digital copy of the Quick Set Up Guide which is provided with each lamp. Revision 3 published 2019-08-28.